Cultivation technique of mulching with 46 cloves of garlic

1. Seed preparation

Choose Yongnian four or six white garlic varieties. When preparing the seeds, choose large, neat, hard, no bruises, mildew, white, and uniform garlic cloves.

2. Soil preparation and fertilization

It is recommended to return straw to the field, which can reduce the amount of fertilizer applied, but also make the soil mellow and facilitate the growth of garlic. Because garlic is covered with plastic film for life, it is necessary to apply foot fertilizer once. Specifically, apply 50-70 kilograms of high-quality compound fertilizer per mu, 250 kilograms of high-efficiency organic fertilizer, or 5-10 cubic meters of decomposed farmyard manure, and mix it with high-quality boron, magnesium, zinc, and iron each with 1 kilogram, and then sprinkle it on the field. After placing it for 5-7 days, sowing.

Three, sowing and filming

Garlic planting is generally planted from late September to early October, at the right time between the autumnal equinox and cold dew. Too late will cause the garlic seedlings to be weak and not conducive to safe overwintering, and it is also easy to cause the garlic to form a single garlic that cannot produce garlic sprouts due to poor growth during the overwintering period, which will reduce production and affect income. Before planting, use columbine to draw three trenches with a depth of about 6 to 8 cm according to the row spacing of 20 cm. Insert the garlic cloves into the trench and cover with soil at a distance of 7 cm. Each border has 12 rows and can cover 3 lanes. Membrane (film width is 90 cm, thickness is 0.05 mm). After all the garlic seeds are planted, level the garlic border. After pouring the masking water, spray the garlic herbicide and cover the film.

Fourth, garlic field management

Garlic generally begins to break the soil and sprout 5-8 days after covering the membrane. When observing the germination rate of garlic under the membrane is about 60%~70%, it can be pushed forward with a homemade brush to help the garlic sprout to break the membrane in time. In some cases, it can be broken manually. Membrane (use a self-made tool with a wire hook to hook out the garlic buds nestled under the membrane). After the seedlings grow to 20-25 cm in height, 100 grams of Jintailong per acre is sprayed on 15 kg of water to lay a solid foundation for the safe overwintering of garlic seedlings. Antifreeze water should be poured before overwintering, and the antifreeze water should be watered after 4 to 5 consecutive days after the night and day disappear. Choose fine weather from 9 am to 3 pm.

Five, cover double film

Choose the width of the film reasonably according to the width of the garlic plot (the width specifications of the garlic film are 4.3 meters, 4 meters, 3, 5 meters, 3 meters, etc.), and prepare the covering utensils, which can be sawed by bamboo poles or branches. A 0.3-meter long stick requires about 1,000 sticks per mu. Prepare some plastic ropes for 1 to 1.5 kilograms per mu. Check the garlic field before covering the film. Use wire hooks to hook out the garlic seedlings that have not come out of the film. Then, in heavy snow, the temperature drops below 0°C for continuous 3~ Cover with two layers of film after 5 days. When covering the double film, you should choose to start after 9 a.m. when the weather is fine. Place the film on the ground and press it evenly on the film to fix it, and then use a plastic rope to tie the bamboo pole into 2/3 of the bamboo pole. Put the film into the ground and fix it at the same time, fix one at a distance of 1 meter until it is placed on the ground, and then take the soil and press it. Note that the width of the overlapped part of the membrane and the membrane should not be less than 0.3 meters. Below this value, it will be blown up by the wind, which will affect the safe overwintering of garlic.

Six, spring management

After the spring begins, water back to green water in mid-March, and apply 10-15 kg of high-quality compound fertilizer per mu with water. It will be repeated every 12 days in the future. In mid-April, 1 kg of 48% phoxim plus 100 ml of 1.8% abamectin will be used to control underground pests.

Seven, timely harvest

Stop watering the garlic sprouts 5 days before harvest. After the garlic sprouts are harvested, they should be watered and topdressed with 10 kg of potassium fertilizer to promote the enlargement of the garlic and improve the quality. Garlic is harvested about 12 days after watering and fertilization, and it is sorted and stored in the air for 8-10 days after harvest.

Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone

PCR Reagents

PCR Reagents

Real time PCR Kit for Monkeypox Virus is used for in vitro qualitative nucleic acid detection of Monkeypox Virus in Human serum, lesion exudate samples and scab specimens. Primer sets and FAM labeled probes are designed for specific detection of Monkeypox Virus, Human RNase P gene extracted concurrently with the test sample provides an internal control to validate nucleic extraction procedure and reagent integrity. Probe targeting human RNase P gene is labeled with VIC.


Intended Use
The test is intended for in vitro qualitative detection of monkeypox virus
(MPXV) antigen in human oropharyngeal swab, whole blood or skin lesion
materials, including lesion exudate, lesion roofs, lesion crusts.
The test is used for monkeypox virus antigen test of monkeypox suspected
populations. Positive result of the antigen test can be used for early triage and
rapid management of suspected populations, but it cannot be used as
diagnosis basis of monkeypox infection. Negative results do not rule out
monkeypox infection and should not be used as the sole basis for treatment or
patient management decisions. Further nucleic acid detection should be
carried out for suspected population whose antigen test result is positive or
negative.
The test is only for professional use, not suitable for family test. The test result
is only for clinical reference and it is recommended to conduct comprehensive
analysis of the disease condition in combination with clinical manifestations of
patients and other laboratory tests.
Test Principle
According to the gold immunochromatographic test principle, the
nitrocellulose membrane is coated with MPXV mAb 2 and goat anti-mouse IgG
antibody, the gold conjugate pad is labeled with MPXV mAb 1. When the
antigen is contained in the sample, the antigen binds with the corresponding
gold labeled monoclonal antibody to form a compound, moving forward under
the chromatography, then combines with the coated antibody in the test line
to form Au-MPXV mAb 1-antigen-MPXV mAb 2 complex to condense into a red
band (Test line, T), indicating a positive result. When the sample does not
contain antigen, complex cannot be formed in the test line, and no red band
appears, indicating a negative result.
No matter whether the sample contains antigen or not, the gold labeled
monoclonal antibody will combine with the coated goat anti-mouse IgG
antibody at the control line to form a Au-MPXV mAb 1-goat anti-mouse IgG
antibody complex and condense into a red band (Control line,C)


Pcr Reagents,Reagents Used In Pcr,Reagents Required For Pcr,Pcr Reagent Kit

Changchun ZYF science and technology CO.,LTD , https://www.zyf-medical.com