E-Light Hair Removal and Skin Rejuvenation System (BR101)
IPL +RF (E-LIGHT )Machine THEORY
IPL (Intense Pulsed Light)+RF (E-LIGHT ) adopts the principle that substance absorbs light selectively. As different target tissues absorbs pulsed light with different spectrum and the light acts on pigment. Through photo thermal and actinism, the machine could dispel pigment, concrete blood vessel, burn the hair follicle and stimulate the collagen to regeneration, then it will achieve the aim to dispelling speckles, treating telangiectasis, removing hair and rejuvenating skin. Because the normal skin absorbs little energy, so the treatment is safe!
IPL +RF (e-light) machine Application:
1. Permanent hair removal: Remove hair from face, upper lip, chin, neck, chest, arms, legs and bikinis area
2. Skin Rejuvenation including skin whitening, pore shrinking, skin smooth and elasticity, etc.
3. Acnes Treatment
4. Vascular lesions Treatment
5. Pigmentations Treatment including freckles, age spot, sun spot, etc
Â
| Light source: | Intense pulsed light |
| Spectrum range: | 420-1200nm, 510-1200nm, 560-1200nm, 585-1200nm, 610-1200nm, 640-1200nm, 690-1200nm IPL energy density: 10~50J/cm2 |
| Pulse method: | Intense pulsed technology (can adjust) |
| Pulse sequence: | 1~5pulse |
| Pulse Intermission: | 1~20ms |
| Pulse width: | 1-20ms |
| Repeat frequency: | 0.3-1Hz |
| E-light Spot size: | 15× 50mm2 |
| Bi-polar treatment head: | 20mm, 30mm, 35mm |
| RF energy level: | 1-30J/cm2 |
| Frequency: | 5MHz |
| Cooling system: | Water cooling, forced-air cooling and semiconductor cooling |
| Cooling temperature: | -4~ 4 degree |
| Operation interface: | 8 inch touch screen |
| Power supply: | 220V/ 50Hz / 110V/60Hz |
| Main machine size: | 60*42*38cm3 |
| Net weight: | 21 KG 22kg with additional RF head |
| Gross weight: | 35 kg 36 kg with additional RF head |
| Package size: | 68*54*54 |
| Out put Power: | 800W/1200W |
Operation procedure
(About 60 minutes for whole face, 30~45 minutes for neck)
A) Carry out a skin evaluation before treatment.
B) Clean skin.
C) Tone skin.
D) Massage with cosmetics.
E) Clean skin.
F) Let the metal side of the cathode pl ate close to the back of the patient.
G) Smear gel on skin and apply treatment with hand piece.
H) Apply anti-aging distillate.
I) Wear face mask for 15-20minutes.
J) Clean skin.
K) Moisturize skin with cosmetics.
L) Carry out a skin evaluation after treatment.
Course of treatment: One course of treatments includes 5 treatments at an interval of every 10 Days~15days.
Food emulsifier refers to the material that can improve the surface tension between various constituent phases in the emulsifying system and form uniform dispersion or emulsifying body, also known as surfactant. Or to make the insoluble liquid into uniform dispersed phase (emulsion) of the material, add a small amount of oil and water can significantly reduce the interface tension, emulsifying effect of food additives.
Emulsifiers in food include:
Emulsification; Foaming effect; Suspension; Demulsification and defoaming; Complexation; Crystallization control; Wetting; Lubrication.
The emulsifiers provided by our company include: sodium stearyl lactate, calcium stearyl lactate, diacetyl tartrate monoglyceride, sucrose fat ester, distilled monoglyceride, laurate monoglyceride, propylene glycol fatty acid ester, polyglycerin monostearate, etc.
Besides the emulsifying agents material in supply, our company also can custom your unique formula upon your requirements. The formula is under confidential to protect your business.
sodium stearyl lactate, calcium stearyl lactate, diacetyl tartrate monoglyceride, sucrose fat ester, distilled monoglyceride
Allied Extracts Solutions , https://www.nballiedbiosolutions.com