Trifluoromethanesulfonate solution dryer LPG-100
1. The material pump adopts the medical grade feeding pump, which needs to adjust the frequency by frequency conversion, can be introduced into the DCS control system, and the conveying pipeline adopts medical grade pipeline.
2. The atomizer is cooled by water. The cooling pipeline is controlled by the electric contact pressure gauge and the atomizer inverter to ensure that the atomizer operates under the condition of cooling water.
3. The feeding pump is controlled by the inverter in manual or automatic mode, and the feeding speed is uniform.
4. The feed pump is interlocked with the atomizer to avoid feeding when the atomizer is stopped.
Drying tower main body (gas hammer shock):
1. The material in contact with the material is SUS304, the thickness requirement is 2mm, the mirror inside the tower is polished without any dead angle, and the surface roughness control Ra≤0.4μm;
2. SUS304 material for thermal insulation, thickness of 1.2mm SUS304, thickness of insulation layer is 75mm, surface roughness control Ra≤0.8μm. The middle frame of the tower body is made of Q235 material.
3. There are two lighting holes on the top of the main tower to facilitate the observation of the working conditions inside the tower. The main tower outlet pipe is made of the inner wall mirror panel, and multiple cleaning hand holes are provided at the curved pipe and the straight section to facilitate cleaning the inner wall of the pipe without removing the pipe.
4. The top of the main tower is designed with a primary air cooling device to reduce the sticking wall at the top of the main tower. In order to prevent the main tower from sticking to the wall, the main tower design diameter is reasonably enlarged.
5. Exhaust exhaust ducts require SUS304
Equipment cleaning requirements: Quickly open cleaning holes and drain holes in the tower body and pipeline, which is convenient for cleaning and meets GMP operating specifications.
The first-stage cyclone separator (gas hammer vibrating) is made of the inner wall mirror panel. The cyclone center tube adopts a detachable design and has a quick opening cleaning hole at the top of the cyclone to ensure high cyclone yield and easy cleaning. The cyclone cone is fitted with a pneumatic jar to ensure that the dry powder does not bridge and accumulate in the cone during collection.
The bag filter is in contact with the material SUS304, and the bag is made of three anti-film bags.
Atomizer speed: 15000 ~ 22000r / min (frequency conversion control);
Nebulizer support and special tools for disassembly
Cosmetic Peptide
Medicine Peptides peptides usually regulate the immune function of the body. It also has the effect of increasing the immune barrier of human body, improving cellular immunity and humoral immunity. Cosmetic peptides are indispensable small molecules that link proteins and amino acids. Beauty peptide has many functions in human body and is an indispensable tissue component. Generally speaking, beauty peptide can regulate the nutrition and immunity of human body. In addition, hairdressing peptide still can adjust the metabolism of cholesterol inside human body. For example, when the body is deficient in cholesterol or peptides, the metabolism of cholesterol in the body becomes impaired."
cosmetic peptides list,cosmetic peptides for sale,cosmetic peptide suppliers,buy cosmetic peptide,cosmetic peptide manufacturers
Shaanxi YXchuang Biotechnology Co., Ltd , https://www.peptide-nootropic.com