Cleaning method of spiral degassing and decontaminator
Cleaning method of the spiral degassing and decontaminating device :
The unique structure allows the screw decontaser to quickly and easily remove contaminants from the system while the system is running. Unlike conventional decontaminators, the screw decontaminator does not require system downtime and does not require disassembly to remove the separated contaminants from the system. Once the screw decontaminator is installed, your system can be kept in operation at all times without the need to switch to a spare decontaminator. The internal structure allows all impurities to settle to the sediment chamber at the bottom of the unit. The decontaminator is continuously affected by the accumulation of dirt and can work continuously. Unlike conventional filters, the pressure drop remains substantially constant as the fluid flows through the screw decontamination unit.
Tests have shown that even small particles can be removed. It can even be said that all solid particles with a specific gravity greater than water can be removed.
The working principle of the cleaning method of the spiral degassing and decontaminating device :
The unique structure of this product is similar to a spiral degassing valve. The specially designed spiral tube is located in the center of the spiral cleaner. It creates a static zone in the spiral cleaner, allowing all the particles of the size to settle to the bottom of the equipment and collect in the sediment chamber. When the particles are separated from the system, the pressure drop of the spiral cleaner remains unchanged, so that no blockage occurs. When the system is in normal operation, impurities can be drained out of the system through the drain valve. The unit is equipped with a large impurity chamber that requires only regular draining.
Technical parameters of cleaning method of spiral degassing and decontaminator :
Processing effect
Sand removal diameter: >0.1mm
Irrigation turbidity: ≤10NTU
Head loss: <0.02Mpa
2. Influent water quality
Raw water turbidity: ≥300NTU
Inlet pressure: ≤0.25Mpa
Working temperature: normal temperature
Features of the cleaning method of the spiral degassing and decontaminating device:
1. The system can discharge the dirt without stopping the system.
2. Centrally remove all dirt without maintenance, without installing a spare filter.
3. No bypass valve or isolation valve is required, the pressure drop is small and does not hinder the movement of the fluid.
4. Can be removed regardless of larger impurities or small particles
Yancheng Rongtai Labware Co.,Ltd , https://www.rongtailab.com