Today's electronic truck scales are more convenient and faster to use than the previous mechanical weighbridges. You should pay attention to the following seven points when using them. Otherwise, improper use will cause the truck scales to be weighed or damaged. Next, the Shanghai electronic truck scale manufacturer Eagle brand weighing device will use the following seven precautions for the electronic truck scale:
1. Before use, preheat it for 5~30 minutes, and check whether the load-bearing platform has a stuck phenomenon. If there is a foreign object stuck in the countertop, it should be eliminated in time, and it is strictly forbidden to exceed the limit.
2 , according to the use of different places, the use of electronic truck scales in business-type locations, the need to be qualified by the local metrology department before use.
3 , when the car goes up and down the truck scale, there must be others to view and direct the accident to prevent accidents. When the car is weighed, it should be observed whether the car is parked in the center of the electronic truck scale, and also check if there is any additional items on the car. After that, the display of the electronic scale is also stable (interpretation : stable and stable; no change ). The indicator light is on before printing can be performed.
4. When weighing, you should always observe whether the weighing indicator is zero or not. If not, you must carry out zeroing before weighing.
5. When the vehicle is on the pound, it should be slowly and evenly opened. The speed should not exceed 5 km / h. When braking, it should be gently braked to stop the emergency stop.
6. During the thunderstorm season, pay attention to the inspection of the foundation pit drainage condition of the electronic truck scale, whether the drain port is blocked, prevent the rainwater from filling the truck scale foundation pit, causing the truck scale to float, and the symmetric weight sensor causes damage.
7. The winter in the north is relatively cold. When using the truck scale, it should be checked whether there is snow or ice, which causes the truck scale to be stuck, or the truck scale weighing sensor is frozen, so that the truck scale cannot be weighed.
The above is the full content of the seven major considerations for the use of electronic truck scales! Finally, you need to remind everyone that you should pay attention to regular maintenance when cleaning, remove the garbage from the foundation pit, remove the blockage of the drain, and keep the foundation pit clean and dry, so that the electronic truck scale can be stabilized (interpretation : stable and stable; no change ) use to increase life expectancy.
Xi'an complex bio-tech CO.,LTD. , https://www.complexpowder.com