Planting process 1. Choose the planting site; 2. Stir the culture material; 3. Pack the culture material; 4. Sterilize at high temperature; 5. Inoculate; 6. Culture.
Precautions Every step requires careful attention. Sawdust pre-soaking is beneficial for sterilization. If you use wood shavings as the culture material for planting fungus, you need to do soak treatment one day in advance. This will improve the effect of high-temperature sterilization and sterilize more thoroughly. The fungus planted afterwards is not susceptible to infection. Be cautious about bagging. A good fungus bag should be filled tightly and tightly. Drilled out of the bacteria bag. If the mouth of the fungus bag is not sealed, air will enter the fungus bag during the inoculation of the fungus, which is prone to pollution, and the sterilization should be thorough. Qualified bacteria bags will be sterilized at a high temperature on the same day, which will cause miscellaneous bacteria overnight and are prone to fermentation and spoilage. Keep the temperature in the sterilizer at more than 100°C, drain the cold air for 10 hours and then bore for more than 3 hours to ensure thorough sterilization. The inoculation should be quick and aseptic. The high-temperature sterilized bacteria bags must be cooled to below 30°C before inoculation, otherwise the fungus may be killed. When inoculating fungus, move fast, and ensure that it is carried out in a sterile environment. After the inoculation, put the bacteria bag into the cultivating room and you can wait for the fat and tender fungus to grow.
Disclaimer: Some articles of this website are transferred from the Internet. If the legal rights of third parties are involved, please inform this website for processing. phone
Best Neck Massager,Shiatsu Neck Massager,Neck Relax Massager,Best Massage For Neck Pain
Shenzhen Jie Zhong Lian Investment Co., Ltd. , https://www.szmeizonscares.com