Precautions when using the ozone generator:
1. Oxygen type ozone generator should pay special attention to the fact that there should be no open flame nearby to prevent oxygen explosion;
2. The ozone discharge tube of the ozone generator should be replaced once a year under normal circumstances;
3. The desiccant in the ozone drying system must be replaced once every six months;
4. Place the ozone generator in a ventilated and dry place. If the environment around the machine is wet, it will leak electricity and the machine will not operate normally.
5. If the cooling water enters the ozone generator, it should be shut down immediately, the discharge system should be completely disassembled, and the discharge tube and desiccant should be replaced;
6. The ozone generator should not be inverted during transportation. It must be checked whether the instruments are in good condition before running.
7. The regulator should be stepped up gradually during the voltage regulation process.
Troubleshooting the ozone generator:
1. The regulator is not properly regulated: check if the regulator fuse is intact and the regulator connector is secure;
2. The transformer does not support boost: check if the transformer high voltage connector is secure;
3. The current of the ammeter is too large: check whether the flow rate of the flowmeter is normal and whether the gas source is normal;
4. The drying system appears wet: the desiccant expires;
5, high voltage porcelain bottle leakage: replace the high pressure porcelain bottle;
6, the discharge tube produces insufficient glow: the discharge tube is overdue and must be replaced;
7. The solenoid valve does not switch normally: replace the solenoid valve;
8. Damage to the high-voltage wiring pile head of the ozone discharge tube: replace the damaged pile head.
Pu Fire Hose,Pu White Color Fire Hose,Colorful Fire Fighting Hose,Pu Fire Fightting Hose
Huaian Wuzhou E-Commerce Co.,Ltd , https://www.wzfireprotection.com