Insulation measures and specific implementation methods of mushroom houses in winter

When the temperature of the mushroom house is lower than 10 degrees Celsius, it grows slowly or stops growing. In order to extend the fruiting time, we must try to increase the temperature of the mushroom room. In cold areas, when growing mushrooms and vegetables in winter, heat preservation and warming must be adopted.
1. When the temperature is lower than 11-13 degrees Celsius, cover the top and surroundings of the existing mushroom house with black plastic film and fasten it with a rope. When the ventilation window is opened, the film should be cut off accordingly, and the usual ventilation need. Daily ventilation or water spraying should be carried out when the temperature is relatively high at noon. Each mushroom room*** must have 2-3 thermometers, placed in different positions to observe temperature changes. Pay attention to the temperature of the top layer. Once the temperature of the top layer exceeds 23 degrees Celsius, the ventilation window should be opened in time to avoid high temperature and affect the mushroom quality.
2. Place multiple ceramic barrels or iron pots on the aisle of the mushroom room to heat the burned charcoal or coal (****** is coke) heat energy. Be sure to pay attention to safety when increasing the temperature. First, we must strictly prevent fires. Use charcoal or coal to move into the house after the open flame is burning, and keep it away from the wooden frame of the mushroom bed. At the same time, do not allow the mushroom bed straw or other flammable objects to approach. Also to prevent carbon dioxide poisoning, you must open the door and windows of the room before entering the room to allow ventilation before entering the room.
Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of third parties are involved, please inform this website for handling. phone

Traffic Safety Barrier

1. One time forming ,anti-impact, cold resistance, lasting,durable

2. There is stable material rubber on the bottom of the board to prevent water penetration. Absorb contact surface, the higher the water pressure, more stable it is.

3. The easy and quick installation can save more cost.

4. With the water inside, the anti-impact ability is better,without the water,it can be moved easily.

5. High flexibility high strength plastic Road safety Traffic barrier, can surrounded to a circle to protect road side, flower nursery and the ecological environment.

Traffic Safety Barrier,Flood Protection Equipment,Temporary traffic flood barrier

Denilco Environmental technology(Suzhou)Co., Ltd. , https://www.wflood.com