Small saw bone machine instructions and precautions:
1. Check that the power supply voltage should meet the specified requirements. The power supply wiring should be firm and reliable, and the power socket should have a firm grounding.
2. Where there is no power lead-out cord with a plug, it should be connected to a full-stage disconnect device with at least 3mm contact opening distance installed by the user at a fixed position. The breaking device rated current should be greater than or equal to 35A.
3, the machine must be placed on the level of the ground or on the table, the body level can be adjusted through the following one foot;
4. When you need to install the saw band, open the door and remove the long handle on the workbench. The band saw blade teeth are mounted forward on the pulleys, and the teeth are all trapped in the grooves.
5. Rotate the knob on the right side of the column to turn the saw blade. The tension of the saw band is adjusted to the fact that the saw bone does not slip. The over-tightening affects the life of the saw band. If it is too loose, it will not work properly.
6. Adjust the adjusting bolts on the back side of the upper box and the column (located in the box body respectively), adjust the pitch and tilt angles of the two driven saw pulleys, so that the saw belt does not fall off when the machine is tested, and the saw belt back does not match the limit bearing. Until friction occurs. Rotate the adjusting bolt clockwise, the saw pulley is tilted back, the saw pulley is tilted back, the adjusting bolt is rotated counterclockwise, and the saw pulley is tilted forward.
7. Check that the two scrapers in the lower box should be close to the saw band.
8. Close the box door and the machine can start normally.
9, trial run: start, observe the saw band should run in the downward direction.
10. Please use the mobile workbench to operate when sawing the whole animal. Saw small pieces of meat, ribs can be selected using the pusher bar and thickness adjustment plate, and the workbench can also be fixed using the pins under the table.
Note: When using the mobile workbench, be sure to remove the pusher on the nose to avoid obstructing work or causing unnecessary collisions!
11. After the machine is started, please use the workbench or the pusher to push the boring. It is strictly forbidden to push materials by hand or other objects to avoid danger!
12. After the machine is started, the saw belt does not move. Check whether the protective cover is tight, whether the saw belt is slippery, whether the line is in poor contact, and the repair is carried out in a targeted manner.
Non Fireproof Gunsafe
Gunsafe is made of strong thick solid steel.After multiple physical tests to ensure that your valuables can be stored safely.
This gun safebox is in high strength and solid structure. Smart technology secures contents away from kids, and others. Reliable lock mechanism lock away with the electronic keypad by creating your own PIN code or lock it with the backup key.For quick access, instantly unlock the safe with a reliable PIN code,Prevents children and others from reaching inside.
Our electronic cabinet safes have anti-theft alarm systems. Enter the wrong password 3 times or wrong fingerprint 5 times, the system will lock and alarm for 1 minute. If someone tries to move it while it is locked, the alarm will also sound. You can set it to silent mode if you want.
The inside is large and deep enough for-7long guns (between 37in and 50in). 3 standard pistols and magazine accessories can be placed on the door panel. The upper adjusting plate can be adjusted and disassembled to adapt to different situations.
If you are considering buying Gun Safe, please feel free to contact us online to negotiate, we as a gunsafe production factory to provide you with high quality and low price products,
Non Fireproof Gunsafe,Storage Gun Safe,Electronic Gun Cabinet Safe,Anti Theft Gun Safe Box,Digital code keyboard gun safe
Hebei Hupai Aodi Cabinet Industry Co.,Ltd. , https://www.aodicabinet.com