What are the methods for repairing automatic packaging machinery?

The automatic packaging machine is widely used in food, medicine, clothing, hardware, postal, transportation and other industries. It provides us with great convenience, but at the same time, the packaging machine has brought us a lot of confusion. The packaging machine has a certain technical content, so it is easy to malfunction, which directly affects the quality of the packaging. So we need to have some common sense about the maintenance of the packaging machine.

First, the automatic packaging machine is not in the position of the package

We first check the soldering iron temperature regulator to see if it is in the required temperature position. We can adjust the temperature in combination with the ambient temperature between plus and minus 10 degrees Celsius. Secondly, we have to check whether the delivery rail is loose, in general The nuts are loose. If the belt slides out to the side, it can't reach the standard position, that is, the belt is loose. It may also be the third case: the cassette, because the operation is not proper or the belt is out of specification, the belt will be stuck in the belt. In the rail. Then use compressed air to remove the remaining part of the strap left inside.

Second, automatic packaging machine

The reason for this failure: 1. The LS1 microswitch on the right side of the upper slide has failed; 2. The shrapnel is blocked by foreign objects, causing the node to be invisible. At this time, it is necessary to repair the switch and remove the foreign matter.

Third, automatic packaging machine

The cause of this failure may be: 1. The belt is adjusted too tightly. At this time, the belt drive seat needs to be lowered downwards, or the position of the motor is adjusted backwards; 2. The large slip belt has oil, and the belt must be removed at this time. , clean it.

Fourth, automatic baler

This kind of failure is generally a mechanical cause. At this time, we should check the positioning panel of the large toe cap to see if it causes serious wear. If it is caused by the wear and tear, the leader can not be fixed when the strap is tightened. This requires a replacement of the positioning template.

Master these kinds of common sense, don't bother in daily work.