Before starting the Chinese medicine pill making machine , it is necessary to do the preparatory work. These steps can not be underestimated, because the process before the operation of the pill making machine is not completed, in fact, it has great disadvantages to the machine, and it is needless to say that the life of the machine is reduced. It is possible to cause malfunction or even damage to the Chinese medicine pelletizer.
Before opening the Chinese medicine pill making machine, it is necessary to carry out a comprehensive investigation on the pill making machine. First, it is necessary to determine whether the surrounding electricity is safe, whether the circuit of the plug and the socket is normal, and no leakage or short circuit due to the problem of the circuit. After checking the * item, do not miss the inspection oil level, that is, the oil level on the gearbox should be in accordance with the standard of the Chinese medicine pellet machine. If it does not meet the requirements of the labeling, it must be adjusted and perfected. Then you need to check if the cooking oil that needs to be filled on the hopper is already installed on the oil cup. Are they all filled? Then, is the component of the internal machine already in compliance with the standard?
Before starting, what are the contents of the Chinese medicine pill machine? The first thing to look at is whether the pelletizer is aligned and tightened. Also, whether the alcohol system has been adjusted clearly, in moderation, and whether it is smooth. A very important thing after zui is to use alcohol to guide the guide frame and the introduction of the knife. After completing the above procedures, you can safely open the Chinese medicine pelletizer for use.
Generally, we should pay attention to the use of traditional Chinese medicine pill making machine . Do not start the machine once it is turned on. First, let the running part run for three minutes to five minutes after starting, because I am worried about the last time I used the Chinese medicine pill machine. At the same time, there are residual medicines stuck in it, which may cause damage to the machine, may also contaminate new drugs, and if it is found that there is no abnormality, it can be fed and get a strip. Then try to return the medicinal material to the hopper. Don't use too much. Just need a part. If the outgoing strip is qualified, you can open the pelleting part again. Also note that the feeding process should be done during the running process. Put it evenly. If you find that the stripping and pelleting are out of synch, then adjust the knob to a consistent pace. Generally, clockwise rotation can speed up the pelleting, and counterclockwise can slow down the pelleting speed.
Sodium Erythorbate Fcc Grade,Sodium Erythorbate Powder,Sodium Erythorbate Food Additive,Food Grade Sodium Erythorbate
SHANDONG BAISHENG BIOTECHNOLOGY CO., LTD , https://www.baishengbioproducts.com