Detailed installation position of the motor of the linear vibrating screen
Customers who have used linear vibrating screens know that the position of the vibrating motor is generally below the linear vibrating screen and on both sides of the screen. It is placed above the vibrating screen, and why the vibrating motor is installed. In a different situation, this is determined by the customer's environment and plant site.
The linear vibrating screen is a universal vibrating screen equipment and one of the hot products of our factory. Due to the long development time, it is much more mature than other vibrating screens, its appearance is more and more beautiful, the processing volume is getting higher and higher and the number of layers is increasing, and the requirements for vibration motors are getting higher and higher, but we In the face of problem solving, the vibration motor produced by our factory was trusted and supported by customers. The following is a brief explanation of the reasons why the vibration motor is installed at a different position on the linear vibrating screen.
First, the reason why the motor of the linear vibrating screen is placed under the side:
The vibration motor is a good method for Zui, but because the customer's factory size is different, you have to adopt other installation methods. In addition to the fixed width of the equipment model, it is necessary to leave a certain width to carry out operations such as feeding, but since the width of the factory is certain, after leaving a certain width such as feeding, the rest is the sieve machine. The width, if the sieve machine is too wide, can not be placed, you need to change the width, use a smaller sieve machine. Once the width of the linear vibrating screen is narrowed, the throughput will be relatively small, which will affect the production schedule. Therefore, in an environment that does not affect the throughput, it is necessary to adjust the width of the vibrating screen, and the two motors are arranged side by side at the bottom, so that it does not affect the production and meets the requirements of the customer.
Second, the linear side of the linear vibrating screen motor reasons:
Many customers require the discharge port to be lower than the ground due to the special environment, and there are certain restrictions. If the vibration motor is placed below, it will increase the height, which is inconsistent with the customer's requirements. How to deal with this problem? The height of the screen box is fixed and cannot be changed arbitrarily. Only the vibration motor can be changed. Therefore, adjusting the position of the vibration motor and moving it from side to side on both sides solves the problem.
Third, the linear vibration screen of the motor on the type of reasons:
The vibration motor is placed on the top, and the above two positions are not suitable.
The above is the location of the vibration motor installation of the linear vibrating screen that Jinjiashun Machinery has arranged for you. If you have other suggestions, please contact us for sales or technicians. We are always welcome to call you.
Split Drape,U Split Drape,U Shape Drape,Surgical Split Drape
Xinxiang Huaxi Sanitary Materials Co., Ltd. , https://www.huaximedical.com