The use of electronic scales is extensive, and the warehouse, logistics, and automotive industries have been widely promoted, but there are only a few users who really understand the operation of the product. Even the zero scale and peeling of the basic scales of Zui The operation of the device is not clear, and then Xiaobian will introduce you how to operate the zero scale and the peeling device.
An electronic scale without a zero tracking device, first zeros it, then measures the weight applied by the zero value of the previous index value to calculate the zero point error.
If it is necessary to equip the electronic weighbridge with automatic zero and zero tracking device, the technician must first remove the indication from the automatic zero and zero tracking range (such as adding 10e weight), and then calculate the zero error according to the flicker point method. For the sake of convenience, the automatic zero or zero tracking device can be temporarily disabled by a normal command such as a keyboard command or a dedicated switch, and then the zero point error is calculated by the flicker point method.
When the technician operates the peeling device of the electronic scale, firstly, the accuracy of the peeling device is determined. A load of a certain weight should be placed on the carrier, and then the operation of the peeling device is started, and the indication is adjusted. Zero, then calculate the “zero point†error after the skinning operation according to the flicker point method; if the skinning weighing test is directly performed after the accuracy test of the skinning device, the “zero point†error is the Eo in the correction error. Ec=E-Eo), be sure to remember not to damage the sensor of the electronic scale when operating.
note:
If the weighbridge electronic scale is zeroed before loading: For non-automatic zero-setting electronic weighbridges (currently rare), place a small weight of 0.5e on the carrier and adjust the weighbridge to a fraction of zero and zero. The value flashes between the degrees, and the small weight is removed to obtain the center of the zero. At this time, the zero position, there is no zero deviation, and the zero-automatic zeroing of the electronic truck scale for semi-automatic zeroing, automatic zero or zero tracking is mostly semi-automatic zero setting device, that is, zero is set by starting a zero setting key. There is almost no electronic platform for automatic zeroing devices, and the specification is based on the advancement and development of technology.
In the above article, if you are not a professional electronic platform person, you may not know much about the related technical operation, but it does not matter. Our manufacturer has professional technicians. If there is any electronic platform operation technology problem before and during the purchase, you may!
SIDE MILLING CUTTER(CARBIDE)
SIDE MILLING CUTTER(CARBIDE)
Side Milling Slotter - Designed to cut flat steel, Mortice keys and safe deposit keys, male and female bit and double bit,Mortice key
Sharp teeth and strengthen the edge design,without burr ,
One by one tooth design of side milling cutter is cutting lighter than staggered teeth.
Material: High hardness carbide. The cutting edge is sharp and no longer need to change the cutter when cut the iron key, greatly save your precious time.
Production process: After grinding processes, the cutting edge is extremely sharp.In particular, the side edge is sharp, and the depth of the side edge ensures the sharpness of the processing e Mortice key.
Side Milling Cutter, Key Cutters,Face Milling Cutters,Milling Cutter
ZHANGJIAGANG KEYCUT CO.,LTD , https://www.keycutblade.com