Key points for reconstructing dry duck bed

Nowadays, with the change of farming patterns, the promotion of the new breeding mode of fermented-bed ducks has been recognized by more farmers, and the problem of aquaculture pollution has become more and more serious. The government departments are responsible for the control of breeding pollution and the encouragement of fermentation bed breeding. , More duck farmers have begun to use and prepare to use the fermentation bed to raise ducks. Is the traditional duck housing suitable for fermented ducks? If you use the original housing for fermenting ducks (click here for details) Changes, high input costs, which are farmers are concerned about. The following experts of the Golden Baby Dry Fermenting Bed explained the key points and costs of the transformation with their user examples. Hope to bring help to breeding friends.
The transformation of duck houses is actually based on the conditions of their own duck houses, and the facilities that need to be reconstructed are not the same. The value of some duck houses is not high. If the new duck house is built, the cost of the scaled duck house is relatively high. If it is rebuilt and the cost is increased, the cost of building a new duck house with a simple construction cost can be 6-70,000 yuan, and the high one can be as high as 60-70,000, so we can Modify or build new conditions.

Most of the farming sheds are basically the structure of the sheds in Figure 1, which are similar. The main key points in the transformation of a duck bed into a duck in a fermentation bed are ventilation, waterproof, moisture-proof, and control of humidity. Taking the example of a housing, the main points for reconstruction are: windows, floors, water lines, etc. .

1. Fermenting bed duck window reformation Add roof-mounted tower sunroof on the roof, no power fan and powered fan alternately install skylights, with an interval of 4-5 meters. One, increase ventilation and ventilation of the house to help discharge ammonia and water; both sides of the house are generally open type, use of elevating plastic film for heat preservation and ventilation, the need to reduce the plastic film to the lowest end Or roll up from the bottom to ventilate the bed and create a convection effect with the skylight.
2. Ventilation bed for duck breeding Ventilation and cooling The duck house can be equipped with a 1.4*1.4 induced draft fan, which is conducive to ventilation and cooling in the summer. An induced draft fan can pull the ventilation of the 60-70 meters in the pen quarters to increase the ventilation in the summer. Ventilation and cooling conditions; conditions can increase the water curtains, summer water curtain cooling, to ensure that the duck house temperature should not be too high.
3. Fermentation bed duck rearing The traditional fermentation bed culture generally adopts the cement farming mode, and then uses a manure scraper or a water washing method to clean it. Manure, if you use the fermentation bed duck, you need to remove the original cement floor chopped, to ensure the permeability of the fermentation mattress material and the ground, if the cement floor is thick, you can take the form of holes in the ground to transform. In addition, the differences between North and South are different. The northern duck cans can use underground or semi-underground fermentation beds. The southern high-humidity ground can use ground-based fermentation beds to prevent excessive moisture or rain immersion.
4. The duckling waterline of the fermentation bed can be modified on both sides of the shed. The width of the traditional water tank feeding line is recommended to be 80-100cm. It should not be too wide to ensure the waterline. The water will not enter the fermentation bed, otherwise the water will be too big to cause the fermentation bed; the nipple type waterline can also be used. Compared with the traditional water line, it is more water-saving, occupies less land, and the nipple waterline width is controlled at about 30cm. You can.
In addition, the house should be rain-proof on the roof, and there must be a drainage ditch around it to prevent rain from flooding into the fermentation bed. The cost of retrofitting is relatively small. The fan is usually 50-60 yuan, and the cost of the induced draft fan is a little higher than 1,000. Labor costs, conditions can be based on their own conditions, the use of more advanced facilities for transformation, the general principle is ventilation, waterproof. In addition, due to the different housing establishments, this article describes mainly for the current Henan, Hebei and other regions of the ordinary farmers breeding housing reform, for your reference only, if different can consult Beijing Huaxia Kangyuan Technology Co., Ltd., telephone toll-free hotline.
Recommended reading:
What are the advantages of dry-sweeping fermentation beds?

Breeding duck breeding maintenance technical points

Halogen Series Operating Theatre Lights

Surgical Light,Led Operate Light,Operating Room Lights,Halogen Series Operating Theatre Lights

NINGBO TECHART MEDICAL EQUIPMENT CO.,LTD , https://www.techartmed.com