Some problems should be paid attention to in the construction of cold storage

When the cold storage is installed and built, the heat preservation of the cold storage should be considered first. The perfect preservation effect of the cold storage is necessary for the firm requirements of the wall around the cold storage. Not only the internal walls of the cold storage, but also the ceiling, the ground needs to be reinforced by heat-insulating materials; at the same time, it is necessary to strengthen the rigor of the thermal insulation boards; it is also necessary to take measures to prevent moisture, water, heat and wind, and prevent cold. One of the main points is that the outer wall of the cold storage is painted white or light, so that it can absorb heat. At the same time, when building a cold storage unit in a cold storage, it is necessary to avoid high temperature environment.

It is also critical to choose the right address for cold storage installation. First, determine the reasonable location based on the storage of the cold storage. If it is a product that needs to be stored, it is generally a choice, and the transportation of the place is convenient for the transportation of the product. If it is a retail commercial cold storage, the cold storage construction site should consider the distance between the product delivery and the sales of the goods, and more effectively ensure the fresh quality of the goods. At the same time, the cold storage installation address is good for power supply, good drainage, and easy to carry goods.

The cold storage must be excluded from the hidden dangers. After the cold storage is installed or put into use or repaired, it is necessary to carry out a comprehensive electrical inspection of the cold storage system. In the place where the temperature is low, the cold storage system is well ventilated, otherwise the dehumidification method should be installed. The wiring of the cold storage system is firm and the wires are installed intact. Cold storage insulation board in the rainy season because the humidity is too high, observe whether the joints of the insulation board will show condensation, of course, these are also temporary, if necessary, need to wipe to drain.