Rinsing machine equipment use: used to remove the oil stain on the surface of the packaging material, and then clean the surface of the packaging material.
Working principle: The aeration method is used to generate the turbulent water flow to force the foreign matter and the packaging material to separate. After the Zui, it is thoroughly cleaned by spraying.
Product Description: The product consists of a sink, a surf device, a conveyor, a sprinkler and a control unit. The whole machine is made of 304 stainless steel. Smooth operation, low noise, high strength of stainless steel mesh belt, small flexibility, not easy to deform, easy to maintain. The conveyor system uses a stepless speed-regulating worm reducer to adjust the motor speed to control the cleaning time. The material is transported through the mesh belt and is turned over by the air bubble to remove the residual oil stain on the surface. After the cleaning is completed, the product is lifted out of the inner tank body by the pusher plate, and then the secondary spray cleaning is performed to transport the material to the material. The following steps.
How to use the rinse machine:
The geared motor of this equipment is a 380V three-phase four-wire power supply, which must be operated by a professional electrician.
(1) Connect the power cord. The link should be based on the label of the power supply. It is strictly forbidden to misconnect 380V and 220V. (Note: After connecting the line, try to turn it and check if the geared motor is reversed!)
(2) Turn on the main power switch. The main power switch is designed with an emergency stop switch to prevent accidents. The device can be stopped urgently.
(4) Start the mesh belt operation switch, and the material starts to be transported to the tank body.
(5) Start the vortex pump switch, inject air into the water tank, make the water in the box tumbling, start cleaning the material, and select the broken bag during the cleaning process.
Rinsing machine notes:
1) The connecting parts must be tightened to prevent loosening. When removing, be sure to press the connecting parts with the snap ring.
2) When discharging sewage, it must be inserted into the waterway to prevent pollution when the sewage is discharged;
3) The equipment should be regularly maintained.
4), the tightness adjustment of the mesh belt. The adjustment of the mesh belt should not be too loose or too tight. When the mesh belt is too loose or too tight, adjust the adjusting bolts on both sides of the mesh belt (the mesh belt tensioning device), pay attention to the adjustment distance on both sides of the adjustment must be consistent, otherwise easy The chain on both sides of the mesh belt is deflected, which causes the chain to derail and affect the normal use of the equipment.
5), the reducer should be regularly lubricated, the equipment should be maintained for a certain period of time.
6), always check the accuracy of the instrument, if there is any error, it should be repaired or replaced in time.
7) Check the transmission oil level at least once a week and change the transmission oil once a month (using the locomotive gear oil).
8) The instrument panel is strictly prohibited from entering, such as bumps, scratches and water.
Anti Static Protective Clothing
Hongxing Factory
Dongying Hongxing is located at Dongying City, Shandong Province China since 1995.
We have 30 categories of products, including Covid-19 products, frock, protection shoes, safety belt, Special gloves.
Our main customer in China is Sinopec, Petro China, Energy company, steel company and Tabacco Company in other countires. Our factory have 500workers and 22 technical employees and invest thirty eight million dollars .
FAQ
1. What are your main products ?- Safety shoes
- Protective helmet
- Work clothes
- Safety cloves
- Protective equipment and masks
2. Can you offer OEM ?
Our company accep OEM service , if you need, please inform us of your specific requirements
3. What's your mode of transportation ?
By sea, By air, By train, By truck, as your request. We also do a good job to deliver goods to your destination.
4. What's your payment terms ?
T/T, L/C, Paypal..... If you need to pay via other ways, please negotiate with us.
5. Can you offer sample ?
Yes, we can offer samples to help you check type and quality.
6. Are you manufacturer or trader ?
We have own factory in Donying city, Shandong province, welcom to visit our factory !
Anti Static Protective Clothing,Anti Static Suit,Anti Static Raincoat,Anti Static Clothes
Dongying Hong Xing Labor Protection Products Co.,Ltd. , https://www.hongxinglabor.com