1. The relevant documents for cross-region operations must be complete and effective. According to the Provisional Measures for the Administration of Cross-District Operation of Combine Harvesters promulgated by the Ministry of Agriculture, cross-region operations of the wheat combine harvester shall have license plates, driving licenses and cross-district operation certificates. The driver of the combine harvester shall hold the driving of the combine harvester. certificate. Otherwise, cross-region operations are not allowed. The above documents should be processed in advance to the local county-level agricultural machinery management department.
Second, the preparation of the combine harvester should be meticulous and comprehensive. For routine problems, the hands of friends are very seriously and have already been prepared. What is highlighted here is:
First, the new combine harvester must be carefully grounded in accordance with the instructions, replace the engine oil and filter element, and conduct a complete inspection, adjustment, fastening and lubrication of the vehicle. The characteristics of “three summers†production determine the tension of the wheat combine harvester operation. Once the combine harvester is put into operation, it will be in full-load continuous operation. If the new car does not work well, it will inevitably affect the operating efficiency.
Second, experience tells us that as long as the power and speed of the engine are not reduced, the main mechanical reason for slow harvesting speed is that the cutter becomes blunt and the drive belt is too loose. Therefore, irrespective of whether your combine is newly purchased or has just been repaired, it is best to buy a new power rod assembly and a full range of spare belts. When the harvesting speed is significantly reduced, it should be based on actual It needs to be adjusted or replaced in time, which is both quick and effective.
Third, each harvester unit must have at least two skilled combine harvester drivers who specialize in driving and machine maintenance. As long as they can ensure the continuous operation of the harvester, you will have money and income. As a result, the increased costs accounted for only a small part of the increase in income.
Third, do not stand-alone cross-zone operations. In recent years, the phenomenon of individuals intercepting aircraft and forcing manual operations on the road has repeatedly been banned. Whether it is on the way or on the way back, it has made the machine hard to guard against. Responding to the interception of machine-cutting machines consumes a lot of energy from the operators, wasting precious time for the operators, and sometimes it will evolve into a fighting incident and even cause personal injury. Most of the interception machine incidents occurred on the harvester unit that was going out alone. To deal with machine interceptors, one is not to go out alone. The second is that when a forced interceptor intercepts the machine, if the operator is not willing to stay in the operation, he should be committed to a clear and decisive attitude, identify his location in time, call 110 for help, to prevent adverse developments. Do not fight with arrogance, nor can it provoke fighting behavior and affect cross-regional operations.
Fourth, to cross-district operation intermediary service qualification units enrolled to participate in cross-regional operations (if you do not know which local intermediary agencies can consult the county level agricultural machinery). The cross-district operation intermediary organization is a cross-district operation service unit approved and filed by the provincial agricultural machinery department, and is led and supervised by the local agricultural machinery department. Combine harvesters are organized by them to organize cross-regional operations, which have the following advantages:
First, they are the legal organizations that organize cross-region operations. They have accurate cross-region operational information and rich experience in cross-region operations. There are feasible operating sites and work routes.
Second, before the harvest of wheat, they generally sent personnel to the site of the work site to conduct field visits and signed a partial contract of intention with the local agricultural machinery department.
Third, when they organize cross-district operations, they generally send out dedicated service vehicles and personnel to lead the harvesters into a unified operation and follow-up services. Behind them are the cooperation of the local agricultural machinery department and the support of numerous combine harvester manufacturers service outlets.
Fourth, before they cross-area operations, they usually organize training programs for combine harvester drivers, train relevant technologies, publish operational information, help with the processing of documents, carry out repairs and maintenance, and supply of spare parts.
Fifth, several practical strategies and techniques in the job.
First, grab the head and not fall in love. Recruitment means that for every job site, it is necessary to fight for the first entry, occupy a favorable position and land, and facilitate operations. Do not love tail, refers to early withdrawal. When it is harvested to 4/5 of the total area, it should be withdrawn in time to the next site. Because the last one-fifth of the harvest is not live.
Second, peace of mind during the day and rapid transfer at night. This will not only effectively use the harvest time, but also prevent individual farmers from blocking it.
Thirdly, inquire about the telephone number of the service center of the harvester manufacturer and the subordinate “Three Guarantees†service point used by the manufacturer of the harvester and take it with you to facilitate timely contact for help in case of failure.
Fourth, new operators find excessive amounts of impurities in the grain tanks during operation, which is usually caused when the throttle is too small when turning near the ground and the harvester speed is reduced. When all the wheat in the barrel of the combine harvester has not been completely drained, it is necessary to continue to work at large throttles and high speeds, and then reduce the throttle after the net is discharged.
Fifth, during operation, the tension of each drive belt is often checked to prevent unnecessary slipping. If the operating efficiency is found to be reduced, the belt can be tightened or the power lever replaced in time to ensure faster harvesting speed and quality.
Small Mini Camera Use Indoor
Mobile video monitoring and alarm system is a set of intelligent system for security to enter the civilian field. This system integrates mobile phone monitoring and mobile phone anti-theft alarm systems. When illegal people break into the restricted area, the system host will immediately call and send SMS or email to the designated users! Users can view the image of the monitoring area with their mobile phones or computers as soon as they receive a phone message.
It eliminates the worries of false alarm of traditional monitoring system and traditional alarm system! The system integrates wireless door magnetic, wireless smoke detector and other wireless alarm accessory information, effectively improving the civilian characteristics of the monitoring system. Shenzhen Kate Technology Co., Ltd. is specialized in mobile video monitoring products. The supporting mobile phone software of this product, namely Kate Guardian, can be linked to mobile text messages or phone calls with video monitoring and home alarm. This product is also a smart home security monitoring anti-theft system: the system is a network but can be completed independently without a computer! The local memory can record video for 24 hours, and you can view and operate all the monitoring images in your home through your Internet phone or computer in other places. The system has its own wireless alarm module, which can be matched with wireless door magnets, probes, smoke detectors and other wireless alarm trigger devices. When someone breaks into the monitoring defense area, the system will automatically call, send SMS and email to the designated four mobile phone users, and will also generate audible and visual sirens locally. After receiving the alarm call and information, the remote user can view the monitoring picture through the Internet mobile phone or computer, control the camera rotation angle and focus, and deploy and remove the alarm system through the mobile phone, while starting the mobile phone video recording function and handling the alarm. Application prospect Home monitoring
After work or when going out, you can open your computer or mobile phone at any time to view the real-time image of your home, communicate with your family face to face, learn about your family, and take care of your family remotely; When the thief steals while no one is at home, the automatic signal can be sent to the community monitoring center in time, and the residents can be notified by mobile short message, email or telephone. All this can be easily achieved through the home video monitoring system. As early as 2004, the total output value of China's video surveillance industry application market had reached 15.1 billion yuan, an increase of nearly 23% compared with 12.3 billion yuan in 2003, and growing at an annual rate of about 20%. According to the survey of the analysis institution, with the accelerating pace of life, the demand for family users' sense of security is gradually increasing, and the requirements for family monitoring and security are also increasingly mature. As the video monitoring system plays an important role in protecting security and preventing crime, the growth of personal users' demand for family security will certainly drive the development of residential monitoring system. The demand for video surveillance from ordinary consumer households is becoming an emerging market for video surveillance applications, and is expected to show significant growth in the next few years.
Small Mini Camera,4G PTZ WiFi Camera,monitoring camera,mini camcorders,Mini DV CCTV Camera,Hidden Spy Mini Camera
China leading manufacturers and suppliers of Small Mini Camera,4G PTZ WiFi Camera, and we are specialize in monitoring camera,mini camcorders, etc.
Small Mini Camera,4G PTZ WiFi Camera,monitoring camera,mini camcorders,Mini DV CCTV Camera, Spi mini Hidden camera
Shenzhen Fuvision Electronics Co., Ltd. , https://www.szsolarcamera.com